LATVERA
RWT75F in LATVERA Golden Dusk lighting; AI concept visualization based on supplier product references.

Architectural Solutions / Doors & windows

RWT75F

Aluminum Door and Window System

Discover the system

Aluminum Door and Window System

An insulated door and window family using a 75 mm frame and a 34 mm flag-type thermal barrier.

Identity

A distinct thermal-barrier arrangement

RWT75F is described through its 34 mm flag-type thermal barrier. The suffix identifies this profile family and should not be read as a folding-door designation. Its door and window arrangements need to be selected from the documented applications and the matching technical sections.

Profile

A 75 mm frame and 85 mm sash

The supplier lists 75 mm frame and 85 mm sash depths. These components should be read together with the glazing and the selected opening type. The external elevation remains a composition of frames, sashes and meeting lines rather than a direct illustration of those internal dimensions.

Coordination

Specify the opening as a whole

The final system includes profiles, thermal separation, glazing, seals and operating hardware. Each should belong to the selected configuration, with the wall junction developed alongside it. Similar naming within the RWT75 group does not establish identical internal components or permit performance claims to transfer between variants.

A place for RWT75F

Considered for your space.

  • Doors and windows
  • Insulated joinery

A closer look

Form & detail.

The finer details

Precisely considered.

Dimensions, finishes and configuration are coordinated around your project.

Frame Depth
75 mm
Vent Depth
85 mm
Profile Thickness
1,8 mm
Max. Glass Thickness
48~58 mm
Thermal Insulation Bar
34 mm

Keep the details

Your project, in detail.

Explore the system drawings and available configurations in the product documentation.

Project & technical notes

Specification requirements

Sizes, spans, loads, thermal values and applicable glazing, motors or fabrics require current supplier data and approved project documents.

Project conditions

Final appearance and performance depend on selections, site conditions, engineering, codes, permits, substrates, installation, supplier data, maintenance and the signed agreement.

Warranty and service

Coverage follows the selected system, components, approved scope, installation conditions and signed agreement. Separate components may have different coverage; the final project warranty governs.

Included scope

Permits, engineering, stamped calculations, surveys, concrete, electrical work, additional waterproofing, drainage connections, cranes, lifts and work by others are included only when expressly listed in the written proposal.

Complete technical, warranty, scope and image terms · LATVERA Catalog page 55 (opens in a new tab)