LATVERA
RW55+ in LATVERA Golden Dusk lighting; AI concept visualization based on supplier product references.

Architectural Solutions / Doors & windows

RW55+

Window and Door System

Discover the system

Window and Door System

A non-insulated 55 mm joinery family with screw-channel mullions and fabrication details that distinguish it from RW55.

Construction

The difference is in the connection

RW55+ introduces screw-channel mullions within the joinery family. This is a fabrication and assembly distinction, not a promise of a visibly wider external frame. The supplier lists the same nominal 55 mm frame and 65 mm sash depths associated with the related RW55 system.

Components

Match the sash to its accessories

The supplier also describes a sash option compatible with PVC-system accessories. That option needs to be selected as part of a complete component and hardware arrangement. The product page can show the architectural composition, while the technical detail establishes which sash and fittings belong together.

Selection

Keep Plus tied to the chosen profile

The Plus designation should be read through the profile and connection details. RW55+ remains a non-insulated joinery family, and its visual similarity to RW55 does not make the two assemblies interchangeable. Final selection should identify the mullion, sash, glazing and accessories used in the project.

A place for RW55+

Considered for your space.

  • Door
  • Window
  • Inward Opening
  • Bottom Hung
  • Outward Opening
  • Tilt&Turn Opening
  • Vent For PVC Accessories

A closer look

Form & detail.

The finer details

Precisely considered.

The supplier-linked performance sheet does not identify RW55+. Confirm the current system detail before specification.

Frame Depth
55 mm
Vent Depth
65 mm
Wall Thickness
1,4 / 1,5 / 2 mm
Max. Glass Thickness
36 mm

Keep the details

Your project, in detail.

Explore the system drawings and available configurations in the product documentation.

Project & technical notes

Specification requirements

Sizes, spans, loads, thermal values and applicable glazing, motors or fabrics require current supplier data and approved project documents.

Project conditions

Final appearance and performance depend on selections, site conditions, engineering, codes, permits, substrates, installation, supplier data, maintenance and the signed agreement.

Warranty and service

Coverage follows the selected system, components, approved scope, installation conditions and signed agreement. Separate components may have different coverage; the final project warranty governs.

Included scope

Permits, engineering, stamped calculations, surveys, concrete, electrical work, additional waterproofing, drainage connections, cranes, lifts and work by others are included only when expressly listed in the written proposal.

Complete technical, warranty, scope and image terms · LATVERA Catalog page 55 (opens in a new tab)