LATVERA
RT50 in LATVERA Golden Dusk lighting; AI concept visualization based on supplier product references.

Architectural Solutions / Curtain wall

RT50

Facade System

Discover the system

Facade System

A 50 mm curtain-wall family whose transom and mullion arrangement differs from condensation-channel systems.

System logic

A shared role for the profiles

RT50 is described with transom profiles that can also serve as mullions. That component arrangement is a distinguishing feature of the family. The actual member layout should follow its technical details, rather than be assumed identical to another 50 mm curtain-wall system with a similar elevation.

Appearance

Capped or structural-glazing treatment

The supplier lists capped and structural-glazing arrangements. These alternatives change the external reading of the grid while retaining a defined supporting assembly. The selected treatment should be coordinated across the facade, including corners, opening elements and the junctions with adjacent opaque construction.

Detail

Water management follows this assembly

RT50 is described without a condensation channel. That distinction makes its own drainage and junction details important during selection. The project should use the documented RT50 profiles and sealing arrangement rather than import assumptions from a skylight or another facade family with a different water-management design.

A place for RT50

Considered for your space.

  • Facade with Cap
  • Structural Glazing
  • Two Side
  • Outward Opening Hidden Vent

A closer look

Form & detail.

The finer details

Precisely considered.

Dimensions, finishes and configuration are coordinated around your project.

Profile Width
50 mm
Mullion Depths
min. 30 – max. 146 mm
Transom Depths
min. 30 – max. 146 mm
Wall Thickness
1,5 / 1,8 mm
With Cape Profile Max. Glass Thickness
42 mm

Keep the details

Your project, in detail.

Explore the system drawings and available configurations in the product documentation.

Project & technical notes

Specification requirements

Sizes, spans, loads, thermal values and applicable glazing, motors or fabrics require current supplier data and approved project documents.

Project conditions

Final appearance and performance depend on selections, site conditions, engineering, codes, permits, substrates, installation, supplier data, maintenance and the signed agreement.

Warranty and service

Coverage follows the selected system, components, approved scope, installation conditions and signed agreement. Separate components may have different coverage; the final project warranty governs.

Included scope

Permits, engineering, stamped calculations, surveys, concrete, electrical work, additional waterproofing, drainage connections, cranes, lifts and work by others are included only when expressly listed in the written proposal.

Complete technical, warranty, scope and image terms · LATVERA Catalog page 55 (opens in a new tab)