LATVERA
REF60 in LATVERA Golden Dusk lighting; AI concept visualization with extended architectural context based on the original product image.

Architectural Solutions / Curtain wall

REF60

Curtain Wall System

Discover the system

Curtain Wall System

A 60 mm curtain-wall family with multiple insulation arrangements and applications including inclined glazing.

Profile

A 60 mm facade language

REF60 uses a 60 mm profile family, producing a different nominal grid width from the supplier's 50 mm facade systems. The chosen cap and glazing treatment determine how that grid appears outside. Profile depth, reinforcement and supports remain separate decisions within the actual facade assembly.

Envelope

Select the insulation arrangement

The supplier describes several isolator arrangements within REF60. These should be selected together with the glass, seals and relevant profiles. The presence of insulation components does not establish one thermal value for every facade; project documentation needs to address the complete configuration and its surrounding interfaces.

Applications

Coordinate vertical and inclined glazing

REF60 is described for facade and inclined-glazing applications. Those uses require their own junctions, support and water-management details, particularly where the glazed surface changes angle. Associated sun-shading elements are options to coordinate with the design, rather than equipment implied to be standard in every installation.

A place for REF60

Considered for your space.

  • Facade with Cap
  • Structural Glazing
  • Semi Structural Glazing
  • High Insulated Facade with Cap
  • High Insulated Structural Glazing
  • Inward Opening Hidden Vent
  • Tilt & Turn Opening Facade with Cap
  • Steel Reinforcement Curtain Wall

A closer look

Form & detail.

The finer details

Precisely considered.

Dimensions, finishes and configuration are coordinated around your project.

Profile Width
60 mm
Mullion Depths
min. 80 mm - max. 255 mm
Transom Depths
min. 68 mm - max. 248 mm
Wall Thickness
1,6 / 1,8 / 2 / 2,5 mm
Max. Glass Thickness
57 mm

Keep the details

Your project, in detail.

Explore the system drawings and available configurations in the product documentation.

Project & technical notes

Specification requirements

Sizes, spans, loads, thermal values and applicable glazing, motors or fabrics require current supplier data and approved project documents.

Project conditions

Final appearance and performance depend on selections, site conditions, engineering, codes, permits, substrates, installation, supplier data, maintenance and the signed agreement.

Warranty and service

Coverage follows the selected system, components, approved scope, installation conditions and signed agreement. Separate components may have different coverage; the final project warranty governs.

Included scope

Permits, engineering, stamped calculations, surveys, concrete, electrical work, additional waterproofing, drainage connections, cranes, lifts and work by others are included only when expressly listed in the written proposal.

Complete technical, warranty, scope and image terms · LATVERA Catalog page 55 (opens in a new tab)