LATVERA
RB120 in LATVERA Golden Dusk lighting; AI concept visualization based on supplier product references.

Architectural Solutions / Complementary systems

RB120

Handrail System

Discover the system

Handrail System

A deeper continuous base-profile family for glass guards and balustrades.

Profile

A deeper base for the glass edge

RB120 is distinguished from RB90 by its deeper base-profile arrangement. The supplier lists a 120 mm depth and 90 mm width for the base family. These component dimensions should be checked in the selected section, particularly where the profile meets the floor edge or surrounding finish.

Composition

Glass joints above the continuous profile

The guard is read as glass above a continuous base, with pane divisions remaining part of the elevation. That arrangement differs from a post-supported railing. The design should retain the actual glass joints and base line rather than depict an unsupported sheet disappearing directly into the floor.

Selection

Specify glass, anchors and substrate together

The selected glass build-up and base fixing detail need to be coordinated with the supporting construction. RB120's larger nominal section does not establish a universal load capacity or permitted guard height. Those requirements should be verified for the complete configuration and its intended project use.

A place for RB120

Considered for your space.

  • Glass guardrails and balustrades

A closer look

Form & detail.

The finer details

Precisely considered.

Dimensions, finishes and configuration are coordinated around your project.

Profile Depth
120 mm
Profile Width
90 mm
Max. Glass Thickness
10+10 mm
Load Resistance
150 kg/mt

Keep the details

Your project, in detail.

Explore the system drawings and available configurations in the product documentation.

Project & technical notes

Specification requirements

Sizes, spans, loads, thermal values and applicable glazing, motors or fabrics require current supplier data and approved project documents.

Project conditions

Final appearance and performance depend on selections, site conditions, engineering, codes, permits, substrates, installation, supplier data, maintenance and the signed agreement.

Warranty and service

Coverage follows the selected system, components, approved scope, installation conditions and signed agreement. Separate components may have different coverage; the final project warranty governs.

Included scope

Permits, engineering, stamped calculations, surveys, concrete, electrical work, additional waterproofing, drainage connections, cranes, lifts and work by others are included only when expressly listed in the written proposal.

Complete technical, warranty, scope and image terms · LATVERA Catalog page 55 (opens in a new tab)