LATVERA
RWTP64 in LATVERA Golden Dusk lighting; AI concept visualization based on supplier product references.

Architectural Solutions / Doors & windows

RWTP64

Insulated Window and Door System

Discover the system

Insulated Window and Door System

An insulated 64.2 mm joinery family with a foam-assisted thermal barrier arrangement.

Construction

Insulation inside the familiar profile size

RWTP64 shares the nominal 64.2 mm frame and 74.2 mm sash dimensions associated with the related 64 family. Its distinction is the foam-assisted insulation arrangement around a 24 mm thermal barrier. The difference belongs in the section and component selection, not an invented change to the exterior geometry.

Composition

Select the opening and its frame together

The chosen window or door arrangement determines the sash, fixed glazing and meeting lines. Those elements should be composed with the surrounding wall and the interior use of the opening. A consistent elevation still needs the actual operating hardware and clearances shown in the selected technical detail.

Specification

Keep RWTP64 separate from RWT64

The foam-assisted assembly should be confirmed in the project specification and supplier documentation. Similar nominal profile depths do not establish identical thermal results or interchangeable components. Glazing, seals and installation remain part of the completed opening, and any performance statement needs to cover that complete configuration.

A place for RWTP64

Considered for your space.

  • Door
  • Window
  • Inward Opening
  • Outward Opening
  • Bottom Hung
  • Tilt & Turn Opening
  • Vent for PVC Accessories
  • Pivot
  • Tilt & Slide
  • Folding

A closer look

Form & detail.

The finer details

Precisely considered.

Dimensions, finishes and configuration are coordinated around your project.

Frame Depth
64,2 mm
Vent Depth
74,2 mm
Wall Thickness
1,6 / 1,8 / 2 mm
Max. Glass Thickness
44 mm
Thermal Insulation Bar
24 mm straforlu / 24 mm with styrofoam

Keep the details

Your project, in detail.

Explore the system drawings and available configurations in the product documentation.

Project & technical notes

Specification requirements

Sizes, spans, loads, thermal values and applicable glazing, motors or fabrics require current supplier data and approved project documents.

Project conditions

Final appearance and performance depend on selections, site conditions, engineering, codes, permits, substrates, installation, supplier data, maintenance and the signed agreement.

Warranty and service

Coverage follows the selected system, components, approved scope, installation conditions and signed agreement. Separate components may have different coverage; the final project warranty governs.

Included scope

Permits, engineering, stamped calculations, surveys, concrete, electrical work, additional waterproofing, drainage connections, cranes, lifts and work by others are included only when expressly listed in the written proposal.

Complete technical, warranty, scope and image terms · LATVERA Catalog page 55 (opens in a new tab)