LATVERA
RWT56 in LATVERA Golden Dusk lighting; AI concept visualization based on supplier product references.

Architectural Solutions / Doors & windows

RWT56

Insulated Window and Door System

Discover the system

Insulated Window and Door System

Insulated aluminum joinery with flat and oval profile alternatives and more than one door-to-frame relationship.

Profile

Flat or oval at the perimeter

RWT56 offers flat and oval profile alternatives, allowing the frame's external character to follow the architectural language of the project. These are different profile configurations within the family. The chosen perimeter should be maintained in the corresponding sash, corner and wall junction details.

Door details

Flush and overlapping alternatives

The supplier describes flush and overlapping door arrangements. This changes how the leaf meets the frame, making the section as important as the front elevation. Hardware, glazing and seals should be selected for the actual arrangement rather than combining dimensions from separate alternatives.

Construction

Thermal separation within the assembly

RWT56 uses a 14.8 mm thermal barrier. Its table lists dimensions associated with several profile alternatives, so a final specification needs to identify the relevant section. The completed opening's performance depends on the selected glass, profiles, seals and installation, not on the family name alone.

A place for RWT56

Considered for your space.

  • Door
  • Window
  • Inward Opening
  • Outward Opening
  • Bottom Hung
  • Tilt & Turn Opening
  • Vent for PVC Accessories

A closer look

Form & detail.

The finer details

Precisely considered.

Dimensions, finishes and configuration are coordinated around your project.

Frame Depth
55,8 – 64,8 mm
Vent Depth
65,8 – 64,6 mm
Profile Thickness
1,4 / 1,6 / 1,8 / 2 mm 1,4 mm
Max. Glass Thickness
39 – 29 mm
Thermal Insulation Bar
14,8 – 14,8 mm

Keep the details

Your project, in detail.

Explore the system drawings and available configurations in the product documentation.

Project & technical notes

Specification requirements

Sizes, spans, loads, thermal values and applicable glazing, motors or fabrics require current supplier data and approved project documents.

Project conditions

Final appearance and performance depend on selections, site conditions, engineering, codes, permits, substrates, installation, supplier data, maintenance and the signed agreement.

Warranty and service

Coverage follows the selected system, components, approved scope, installation conditions and signed agreement. Separate components may have different coverage; the final project warranty governs.

Included scope

Permits, engineering, stamped calculations, surveys, concrete, electrical work, additional waterproofing, drainage connections, cranes, lifts and work by others are included only when expressly listed in the written proposal.

Complete technical, warranty, scope and image terms · LATVERA Catalog page 55 (opens in a new tab)