LATVERA
RW55 in LATVERA Golden Dusk lighting; AI concept visualization based on supplier product references.

Architectural Solutions / Doors & windows

RW55

Window and Door System

Discover the system

Window and Door System

Straight-lined, non-insulated aluminum joinery in a 55 mm frame family, with several opening configurations.

Profile

A straight architectural outline

RW55 uses a straight profile language around windows and doors. Its listed frame depth is 55 mm, paired with a 65 mm sash depth. These dimensions establish the profile family, while the actual elevation depends on the chosen sash, fixed lights and the position of intermediate members.

Applications

More than one opening format

The supplier describes hinged, swing, pivot and tilt-and-slide applications within the RW55 family. Each requires its own hardware and assembly details. Selecting an opening type early keeps the frame layout, handle position and movement clear, particularly where doors and fixed glazing share one elevation.

Specification

A non-insulated system choice

RW55 is identified as non-insulated joinery. Its suitability depends on the intended location and the project's enclosure requirements. Glazing thickness, opening hardware and wall interfaces should be confirmed for the chosen configuration rather than transferring assumptions from the similarly named thermally separated RWT families.

A place for RW55

Considered for your space.

  • Door
  • Window
  • Inward Opening
  • Bottom Hung
  • Outward Opening
  • Outward-Inward Opening Coplanar
  • Tilt&Turn Opening
  • Swinging Door
  • Tilt & Slide
  • Pivot

A closer look

Form & detail.

The finer details

Precisely considered.

Dimensions, finishes and configuration are coordinated around your project.

Frame Depth
55 mm
Vent Depth
65 mm
Wall Thickness
1,4 / 1,8 / 2 mm
Max. Glass Thickness
36 mm

Keep the details

Your project, in detail.

Explore the system drawings and available configurations in the product documentation.

Project & technical notes

Specification requirements

Sizes, spans, loads, thermal values and applicable glazing, motors or fabrics require current supplier data and approved project documents.

Project conditions

Final appearance and performance depend on selections, site conditions, engineering, codes, permits, substrates, installation, supplier data, maintenance and the signed agreement.

Warranty and service

Coverage follows the selected system, components, approved scope, installation conditions and signed agreement. Separate components may have different coverage; the final project warranty governs.

Included scope

Permits, engineering, stamped calculations, surveys, concrete, electrical work, additional waterproofing, drainage connections, cranes, lifts and work by others are included only when expressly listed in the written proposal.

Complete technical, warranty, scope and image terms · LATVERA Catalog page 55 (opens in a new tab)