LATVERA
REPF160 in LATVERA Golden Dusk lighting; AI concept visualization with extended architectural context based on the original product image.

Architectural Solutions / Sliding systems

REPF160

160 Performance Sliding System

Discover the system

160 Performance Sliding System

PowerFeel is a thermally separated sliding system distinguished by its closing mechanism and mono-rail arrangement.

Movement

Sliding with a defined closing action

REPF160 combines sliding movement with the supplier's PowerFeel closing mechanism. The way the sash meets and closes against the frame is central to the system's identity. PowerFeel is the product name; it should not be interpreted as confirmation that the door is electrically driven.

Composition

A mono-rail glazed opening

The supplier describes a mono-rail arrangement, with the frame and moving sash designed as one assembly. The fixed and operable portions therefore have specific relationships within the opening. Their actual meeting profiles and glazing divisions should guide the elevation rather than a generic multi-track sliding-door layout.

Construction

Thermal separation within the frame

The listed frame depth is 157.8 mm, with a 71.2 mm sash and 34 mm thermal barrier. These dimensions belong to the documented configuration. Glazing, hardware, sealing and threshold details should be selected together; the nominal depths alone do not establish a completed door's thermal or weather performance.

A place for REPF160

Considered for your space.

  • Door
  • Window
  • Slim Sliding
  • 45’ Vent Combination
  • Vent with Glazing Bead
  • Mono Railed Frame

A closer look

Form & detail.

The finer details

Precisely considered.

Dimensions, finishes and configuration are coordinated around your project.

Frame Depth
157,8 mm
Vent Depth
71,2 mm
Wall Thickness
1,7 / 1,8 / 2 mm
Max. Glass Thickness
46 mm
Thermal Insulation Bar
34 mm

Keep the details

Your project, in detail.

Explore the system drawings and available configurations in the product documentation.

Project & technical notes

Specification requirements

Sizes, spans, loads, thermal values and applicable glazing, motors or fabrics require current supplier data and approved project documents.

Project conditions

Final appearance and performance depend on selections, site conditions, engineering, codes, permits, substrates, installation, supplier data, maintenance and the signed agreement.

Warranty and service

Coverage follows the selected system, components, approved scope, installation conditions and signed agreement. Separate components may have different coverage; the final project warranty governs.

Included scope

Permits, engineering, stamped calculations, surveys, concrete, electrical work, additional waterproofing, drainage connections, cranes, lifts and work by others are included only when expressly listed in the written proposal.

Complete technical, warranty, scope and image terms · LATVERA Catalog page 55 (opens in a new tab)