LATVERA
R50 in LATVERA Golden Dusk lighting; AI concept visualization based on supplier product references.

Architectural Solutions / Curtain wall

R50

Facade System

Discover the system

Facade System

A 50 mm curtain-wall family offering capped, semi-capped and structural-glazing expressions.

Appearance

Choose how the grid is expressed

R50 provides capped, semi-capped and structural-glazing alternatives within its curtain-wall family. The external cap or joint treatment establishes how strongly the horizontal and vertical grid reads. That choice should be resolved with the glazing layout so the elevation matches the corresponding facade construction.

Structure

Profiles coordinated with the building

The supplier describes steel reinforcement as an option within the system. Whether reinforcement is needed follows the selected member and project design, not a visual preference. Mullion and transom arrangements should therefore be coordinated with spans, support positions and the actual glazing specification.

Openings

Operable bays within fixed glazing

Concealed opening options allow selected areas of the curtain wall to provide ventilation. Their location and movement should be planned with the facade grid, room layout and operating access. The chosen vent must retain its actual sash and hardware details rather than be represented as unbroken fixed glass.

A place for R50

Considered for your space.

  • Facade with Cap
  • Structural Glazing
  • Two Side
  • Outward Opening Hidden Vent
  • Parallel Opening Hidden Vent
  • Steel Reinforcement System

A closer look

Form & detail.

The finer details

Precisely considered.

Dimensions, finishes and configuration are coordinated around your project.

Profile Width
50 mm
Mullion Depths
min. 80 mm - max. 290 mm
Transom Depths
min. 30 mm - max. 146 mm
Wall Thickness
1,6 / 1,8 / 2 / 2,2 / 2,5 / 3 mm
With Cape Profile Max. Glass Thickness
42 mm

Keep the details

Your project, in detail.

Explore the system drawings and available configurations in the product documentation.

Project & technical notes

Specification requirements

Sizes, spans, loads, thermal values and applicable glazing, motors or fabrics require current supplier data and approved project documents.

Project conditions

Final appearance and performance depend on selections, site conditions, engineering, codes, permits, substrates, installation, supplier data, maintenance and the signed agreement.

Warranty and service

Coverage follows the selected system, components, approved scope, installation conditions and signed agreement. Separate components may have different coverage; the final project warranty governs.

Included scope

Permits, engineering, stamped calculations, surveys, concrete, electrical work, additional waterproofing, drainage connections, cranes, lifts and work by others are included only when expressly listed in the written proposal.

Complete technical, warranty, scope and image terms · LATVERA Catalog page 55 (opens in a new tab)